Slide THE WORLD OF CONSTRUCTION CHEMICALS

>> HOME | >>PRODUCTS | ALFIZOL

Alfill ALFIZOL

 ALFILL AlFIZOL Two Component Water Insulation Material

Meet the new face of waterproofing! Alfizol allows concrete to breathe with its elastic and high water impermeability formula and creates a perfect insulation layer thanks to its high adhesion feature.

Package: 20Kg

Usage Areas: Indoor and outdoor. In horizontal and vertical applications. In water tanks, cisterns, swimming pools (provided that they are covered). Foundation insulation, retaining walls and basement insulation. For the purpose of impermeability to salt water. In the insulation of terrace roofs. In the sewer pipes. In irrigation channels, manholes, concrete pipes. Wet areas such as bathrooms, kitchens and balconies. In facilities such as hot springs, Turkish baths. In flower bed insulation. It is used for bonding ceramic, granite and coating materials.

Appearance Component A / Gray colored fine powder
Component B / White liquid
Density A component / 1,40 kg / lt
B component / 1,03 kg / lt
Mixing ratio 7 kg. liquid / 20 kg. powder
Application Temperature Between +5°C to 35°C
Flexibility Very good
Pressurized Water Resistance (DIN 1048) 7 bar positive
Capillary Water Absorption (TS 4045) 0,018 kg / m2h1 / 2
Resting Time 3-5 minutes
Time to Use Mechanical Strength: 3 days
Waterproofing: 7 days
Coverage Time 3 days
Service Temperature -30°C / +80°C

Consumption:

1 kg / m2 is applied for each layer and 1 mm. thickness is obtained. It is recommended to apply 2 coats (2 kg / m2). In places where high protection is required, the consumption amount can be up to 3 – 4 kg / m2.

Attention:

Avoid application at temperatures below + 5 ° C and above + 35 ° C. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind. Do not add water to the mixture. Powder component should always be added to liquid component. During the application, wet film thickness should not exceed 2 mm for a single layer.

 

Packaging and Shelf Life:

Component A: In 20 kg craft bags. Component B: 7 kg. Plastic drums. It can be stored for 12 months on the pallet with 10-layer stacks in non-humid environments. Shake the liquid component before use and protect against freezing.

©[2020] Alfill | World Of Construction Chemicals

Log in with your credentials

Forgot your details?