>> HOME | >>PRODUCTS | MAKFIL
ALFILL MAKFIL Exterior and Interior Machine Plaster Mortar
Long-lasting structures with Makfil!
Makfil is a cement-based, multi-purpose, easy-to-apply plaster mortar. It extends the life of the building by using it on the interior and exterior facades of the buildings and prevents moisture from occurring. Makfil, which does not sag in vertical applications, is an economical way to protect the structure.
Package: 20Kg
Usage Areas: It is used for plastering concrete, exposed concrete, brick, pumice block, aerated concrete etc. surfaces on the exterior and interior of buildings.
| Appearance | Gray powder |
| Powder Density | 1,4 kg/lt |
| Water Mixing Ratio | 4.5-5.5 lt water / 25 kg powder |
| Resting Time | 5-10 minutes |
| Pot Life | About 2-3 hours |
| Application Temperature | + 5°C to + 35°C |
| Tensile Adhesion Strength | ≥ 0,3 N/mm² |
| Compressive Strength | ≥ 2,5 m m² |
| Flexural Strength | ≥ 1 m m² |
| Thermal Conductivity | 0,50 W/mK |
| Service Temperature | -20°C / +70°C |
Consumption:
13 – 14 kg / m² (For each 1 cm thickness)
Attention:
Avoid application at temperatures below 5 ° C and above + 35 ° C. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind.
Do not add powder and water to the expired mortar.
Packaging and Shelf Life
In 25 kg craft bags. It can be stored for 12 months on a pallet in a 10-fold stacked in a dry and intact package.