ALFILL MANTOFILS Fiber Reinforced Thermal Insulation Board Plastering Mortar
Mantofil S is produced to make insulation stronger. Mantofil S, which is produced in a way that minimizes energy loss thanks to its fully compatible structure with insulation styrofoam, extends the life of the materials and makes the insulation stronger thanks to its fiber additive.
Usage Areas: It is used for plastering thermal insulation boards (expanded polystyrene (EPS) and extruded polystyrene (XPS), rock wool, polyurethane boards, etc.) indoors and outdoors.
|Appearance||Gri renkli ince toz|
|Powder Density||1,50 kg/lt|
|Water Mixing Ratio||5,5-7 lt water / 25 kg powder|
|Resting Time||5 – 10 minutes|
|Pot Life||About 2 hours|
|Application Temperature||Between + 5 ° C and + 35 ° C|
|Parlaklık||Mat (G3)(EN 1062-1)|
|Kuru Film Kalınlığı||> 400μm (E5) (EN 1062-1)|
|Tane Büyüklüğü||Kalın; < 1500μm (S3)(EN 1062-1)|
|Su Buharı Aktarım Hızı||Yüksek; > 150 g/(m².d)(V1)(EN 1062-1)|
|Su Aktarım Hızı||Düşük; ≤ 0,1 kg/(m².h0,5)(W3)(EN 1062-1)|
|Eğilme Dayanımı||> 3 N/mm² (EN 196-1)|
|Basınç Dayanımı||> 10 N/mm² (EN 12190)|
|Servis Sıcaklığı||-20°C / +70°C|
3 – 4 kg / m² (Depends on the application method)
Avoid application at temperatures below + 5 ° C and above + 35 ° C. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind. After the application, make sure that there is no snowfall or severe cold until the cement sets (approximately 1 week). Do not add powder and water to the expired mortar. Be careful not to use the boards that have lost their properties by staying in the sun for a long time.
Packaging and Shelf Life:
In 25 kg craft bags. It can be stored for 12 months on the pallet in a 10-fold stacked in a dry and intact package.