>> HOME | >>PRODUCTS | MANTOFIL Y
ALFILL MANTOFILY Thermal Insulation Board Adhesive Mortar
Mantofil Y is used for bonding insulation styrofoam. Thanks to its water vapor permeability, it allows the surface to breathe. It is resistant to cracking and deterioration thanks to its flexible structure.
Package: 25Kg
Usage Areas: It is used for bonding thermal insulation boards (expanded polystyrene (EPS) and extruded polystyrene (XPS), rock wool, polyurethane board etc.) indoors and outdoors.
| Appearance | Gray colored fine powder |
| Powder Density | 1,50 kg/lt |
| Water Mixing Ratio | 5.5 – 7 lt water / 25 kg powder |
| Resting Time | 5 – 10 minutes |
| Pot Life | About 2 hours |
| Skinning Time | 15 minutes |
| Anchoring | Min. After 24 hours |
| Plaster Application Time | 1 – 2 days later |
| Application Temperature | Between + 5°C and + 35°C |
| Adhesion Force | ≥ 1,0 N/mm² (EN 1348) |
| Slip | ≤ 0,5 mm (EN 1308) |
| Service Temperature | -20°C / +70°C |
Consumption: 3 – 4 kg / m² (Depends on the application method)
Caution: +Avoid application at temperatures below + 5 ° C and above + 35 ° C. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind.Do not add powder and water to the expired mortar. To prevent heat transfer, place the heat insulation plates so that the gap between them is as little as possible. Be careful not to use the boards that have lost their properties by staying in the sun for a long time.
Packaging and Shelf Life: In 25 kg craft bags. It can be stored for 12 months on the pallet in a 10-fold stacked in a dry and intact package.
