>> HOME | >>PRODUCTS | MINERALFIL G100
ALFILL MINERALFIL G100 Grain Textured Mineral Plaster
Breathing decor of the exterior; Mineralfil G100. Mineralfil G100 grain textured mineral plaster provides easy application. You can apply grain textured mineral plaster on the facade of the building alone or paint after application.
Package: 25Kg
Usage Areas: Used on interior and exterior plasters as the final layer decorative coating material in jacketing systems.
| Appearance | White granule |
| Powder Density | 1,50 kg/lt |
| Water Mixing Ratio | 5 – 6.5 lt water / 25 kg powder |
| Resting Time | 2 – 3 minutes |
| Pot Life | Approximately 1.5 – 2 hours |
| Application Temperature | Between + 5 ° C and + 35 ° C |
| Dry Film Thickness | > 400 µm (E5) (EN 1062-1) |
| Grain Size | Very Thick; > 1500 µm (S4) (EN 1062-1) |
| Water Vapor Transfer Rate | High; > 150 g / (m².d) (V1) (EN 1062-1) |
| Water Transfer Rate | Low; ≤ 0.1 kg / (m².h½) (W3) (EN 1062-1) |
| Application Thickness | About 2 mm |
| Complete Drying Time | 1 – 2 days |
| Service Temperature | -20°C / +70°C |
Consumption:
2,2 kg / m² (may vary depending on the application surface)
Attention:
Avoid application at temperatures below + 5 ° C and above + 35 ° C. If possible, apply without a break, if necessary, divide the surface into areas of approximately 20 m2 and apply separately. Do not allow the formation of a film layer on the plaster by passing the plastic trowel application within 10 minutes at the latest. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind. After the application, make sure that there is no snow or severe cold until the cement sets (about a week).
Do not add powder and water to the expired mortar.
Packaging and Shelf Life:
In 25 Kg Kraft bags, in non-humid environments and in intact packaging. It can be stored for 12 months on the pallet with 0 layer stacking.
