>> HOME | >>PRODUCTS | MINERALFIL L100
ALFILL MINERALFIL L100 Line Textured Mineral Plaster
Breathing decor of the exterior; Mineralfil L100. Mineralfill L100 striped textured mineral plaster provides easy application. You can apply streaked mineral plaster on the facade of the building alone or paint after application.
Package: 25 Kg
Usage Areas: It is applied on interior and exterior wall plasters as the final layer decorative coating material in jacketing systems.
| Appearance | White granule |
| Powder Density | 1,50 kg/lt |
| Water Mixing Ratio | 5 – 6.5 lt water / 25 kg powder |
| Resting Time | 2 – 3 minutes |
| Pot Life | Approximately 1.5 – 2 hours |
| Application Temperature | Between + 5°C and + 35°C |
| Dry Film Thickness | > 400 µm (E5) (EN 1062-1) |
| Grain Size | Very Thick; > 1500 µm (S4) (EN 1062-1) |
| Water Vapor Transfer Rate | High; > 150 g / (m².d) (V1) (EN 1062-1) |
| Water Transfer Rate | Low; ≤ 0.1 kg / (m².h½) (W3) (EN 1062-1) |
| Application Thickness | About 2 mm |
| Complete Drying Time | 1 – 2 days |
| Service Temperature | -20°C / +70°C |
Consumption:
2,2 kg / m² (may vary depending on the surface of the application area)
Attention:
Avoid application at temperatures below + 5 ° C and above + 35 ° C. If possible, apply without a break, if necessary, divide the surface into approximately 20 m2 areas and apply separately. Do not allow the formation of a film layer on the plaster bypassing the plastic trowel application within 10 minutes at the latest. Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind. After the application, make sure that there is no snow or severe cold until the cement sets (about a week).
Do not add powder and water to the expired mortar.
Packaging and Shelf Life:
In 25 Kg Kraft bags, in non-humid environments, and in unopened packaging. It can be stored for 12 months on the pallet with 0 layer stacking.
